Request for Quote

This form walks through a series of questions to identify the best FFC / FPC fixture solution.
Based on your selections Flexible Test will respond in timely manner.
  • For FFC's that terminate in a rectangular end shape standard fixtures can be quoted based on your input.
  • For FPC's that terminate with ears or tabs make sure to include the mating connector p/n, and upload your drawing with dimension for review.
  • If your DUT flex is < 26mm from the DUT body to the end of the circuit please fill-in clearance sections to determine correct fixture style.
  • If additional information is needed to complete your quote we will use the e-mail or call the contact provided.
After completing entries make sure to finalize by selecting "Submit" to forward to Flexible Test.
We value your business, and look forward to delivering your Flexible Test fixture (s).

Conductor pattern type

 Contact end examples




             FFC Jumper                  PCB Through Hole


76-102mm is typical , selection will be checked for availability. Skip if PCB termination.
Conductor plating
Standard lead time 2-3 weeks ARO
Additional application requirements

Please review. If files were uploaded with this information skip to the next question. "Submit" when finished

DUT flex shape end style

DUT flex end types

Normally number of (contacts + 1) x pitch
Typically 0.3 mm +/-.05mm. Include dimension with backer if attached.
Upload drawing below to flow down requirements
Could apply to test fixture housing, DUT body itself, or neighboring DUT flex if mutli-circuit
Could apply to test fixture layout, DUT body itself, neighboring DUT flex if mutli-circuit s are vertically positioned

Please "Submit" each request separately. We will review all submissions carefully. Thanks.